- 2 Knobs
- 1 for each side of the door
- Mounting Screws.
- 2 keys on entrance knobs (if you have a group of locks keyed alike, there may not be 2 keys per lock).
- Surface mounted knob (one side of the door only)
- Mounting Screws
|Dexter By Schlage Lifetime Limited Mechanical & 5 Year Finish Warranty|
Lifetime Mechanical Warranty
SCHLAGE MAKES NO OTHER WARRANTY, CONDITION OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES AND CONDITIONS RELATING TO MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.
IN NO EVENT SHALL SCHLAGE BE LIABLE FOR ANY INCINDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE SALE, USE OR MISUSE OF THE PRODUCT.
Note: Some states do not allow limitations on incidential, special, or consequential damages, so the above limitations may not fully apply.
|Finish Care and Cleaning of External Trim|
|605 (Bright Brass),
609 (Antique Brass), 612 ((Satin Bronze),
619 (Satin Nickel), 620 (Antique Pewter),
716 (Aged Bronze), 622 (Matte Black)
|Lacquered or clear-coated finishes should be wiped with a soft, damp cloth. A mile soap may be lightly used if very dirty. Particular care should be taken to avoid paint smears, thinners and strong cleaning agents as they will quickly destroy the protective coatings and subject the finished to rapid oxidation and discoloration. Initial care for finishes requires only periodic cleaning with mild non-abrasive soap and light buffing with a soft cloth.|
|613 (Oil Rubbed Bronze)||Wipe with a little vegetable oil on a soft cloth. Too much oil may leave a residue to come off on the hands. Household detergents and mild abrasive powder may be used to restore the high metal color without seriously affecting the original compound of the metal. Then rub with a paste wax,|
|625 (Bright Chrome), 626 (Satin Chrome)||Wipe with a soft damp cloth. A high grade chrome polish may be used according to directions to clean and restore the original shine or satin finish.|